Error code 6000 on Canon printers:

  1. The sensor of the grating is broken or dirty. Solution: replace or clean the sensor of the printer.
  2. The paper feeder does not return. Solution: At this time, just gently put the feeder back in position, and then turn on the machine to print normally.
  3. The feeder is broken. Solution: It is better to replace this situation, otherwise it will easily appear again.
  4. The temperature of the print head is too high. Solution: replace the ink tank or logic board, you can replace the ink tank, or you can add some ink to the ink tank without ink.

Tips to avoid Canon printer error 6000

  1. Please do not disassemble, move or drag at will. If there is any malfunction, please contact the information staff.
  2. Foreign objects (staples, metal sheets, liquids, etc.) are prohibited from entering the machine, otherwise, it may cause electric shock or machine malfunction.
  3. Turn on the computer only when the power of the printer is normal and the data cable is connected to the computer.
  4. Do not move, drag, or turn off the printer while printing.
  5. When the print volume is too large, keep the print volume within 30 copies and let the printer rest for 5-10 minutes to avoid overheating and damage to the printer.

The main reason for the Canon printer error code 6000 is as follows:

If the raster sensor is broken or dirty. Replace or clean it up. The paper feeder does not return to its position. At this time, just put the paper feeder back in position gently, and then turn it on to print normally. Under normal circumstances, this problem occurs mainly because you put too much paper, or the paper you use is too poor.

The feeder is broken. This situation is best replaced, otherwise, it will easily appear again. The print head temperature is too high. Replace the ink tank or logic board. The ink cartridge can be replaced. It is also good to add some ink to the ink cartridge without ink.

How to solve Canon printer error code 6000 are as follows:

  1. If the grating sensor is broken or dirty, replace or clean it.
  2. The paper feeder does not return, as long as it is light Gently put the paper feeder back in position, and then turn it on to print normally. Under normal circumstances, this problem occurs mainly because you put too much paper when you put it, or because the paper you use is too bad.
  3. The feeder is broken. It is better to replace it in this case, otherwise, it will easily appear again.
  4. The print head temperature is too high. Replace the ink tank or logic board, you can replace the ink cartridge, or you can replace the ink cartridge without ink Just add some ink.